Daiwa BG 3000

$109.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG 3000	8/240, 10/200, 12/170	6+1	5.6:1	15/280, 20/240, 30/190	15.4

Daiwa BG Saltwater Spinning Reels are so smooth with digitally cut gears and seven ball bearings. Daiwa has redesigned these reels for 2016. These reels are powerful, yet priced just right. There's a size for your every fishing need whether it's inshore, offshore, or shark fishing.

"Hard Bodyz" body and side cover
Infinite Anti-Reverse system
6BB+1
Manual Return Bail (4500 and Larger)
Machined aluminum screw in handle
Carbon ATD
Waterproof drag system
Digigear system
Braided line ready spool
Dynamic cut aluminum ABS spool
Air rotor

Daiwa BG 4000

$109.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG 4000	10/300, 12/260, 14/210	6+1	5.7:1	20/370, 30/280, 40/200	17.6

Daiwa BG Saltwater Spinning Reels are so smooth with digitally cut gears and seven ball bearings. Daiwa has redesigned these reels for 2016. These reels are powerful, yet priced just right. There's a size for your every fishing need whether it's inshore, offshore, or shark fishing.

"Hard Bodyz" body and side cover
Infinite Anti-Reverse system
6BB+1
Manual Return Bail (4500 and Larger)
Machined aluminum screw in handle
Carbon ATD
Waterproof drag system
Digigear system
Braided line ready spool
Dynamic cut aluminum ABS spool
Air rotor

Daiwa Certate LT4000-CXH Spinning Reel

$499.99

Reel Name:

Mono Line Cap. (test/yd):

Bearings:

Gear Ratio:

J-Braid cap. (lb/yd):

Max Drag (lb):

CERTATELT4000-CXH

12/160, 14/140

10 CRBB + 1

6.2 : 1

10/220,15/185

Loaded with top-of-the-line features and technologies that were previously only found in Daiwa's flagship reels, the Daiwa Certate LT Spinning Reels redefine what you can expect from spinning reels in their class. Built around Daiwa's LT "Light and Tough" concept, the Certate LT utilizes a lightweight, compact body to house an oversized precision machined main gear for the perfect combination of power and precision. Daiwa has borrowed their revolutionary monocoque single-piece body design from their ultra high end models like the Exist LT to create an aluminum frame that not only provides extreme rigidity and strength, but eliminates the necessity for pins and screws to hold the body together, thus making the reel more resistant to water intrusion. This frame design in addition to Daiwa’s proprietary Magseal technology used to seal the main shaft and roller bearing, make the Certate LT a reel fit to withstand the elements in both freshwater and saltwater environments. Other standard issue Daiwa features such as a lightweight Zaion Air Rotor Design and corrosion resistant ball bearings make the Certate LT a proper weapon of choice for those looking to dominate the lakes and inshore waters with the latest cutting-edge performance.

Daiwa Technology Found In Certate LT Spinning Reels:

LT Concept - The LT family of reels boast a smaller, lighter, more compact body which is paired with a larger DigiGear for the ultimate combination of Light and Tough.
Monocoque Body - Monocoque Body refers to the use of a one-piece frame and reel body. A single piece body allows for exceptional strength and rigidity, better spatial efficiency for housing larger gears, improved water resistance with the absence of screws, and significant weight reduction.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
MagSeal - MagSeal is the process of using MagOil, a special liquid developed through space engineering, to create a water and dust resistant barrier. Unlike rubber seals, MagOil will not effect the rotational performance of a reel. This creates a seal that allows the reel to maintain a light and smooth rotation for optimal performance.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
Corrosion Resistant Ball Bearings - Corrosion Resistant Ball Bearings boast a lifespan up to 12 times longer than traditional stainless steel bearings.

Daiwa BG 5000

$129.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG 5000	14/470, 17/380, 20/280	6+1	5.7:1	40/480, 50/360, 65/310	22

Daiwa BG Saltwater Spinning Reels are so smooth with digitally cut gears and seven ball bearings. Daiwa has redesigned these reels for 2016. These reels are powerful, yet priced just right. There's a size for your every fishing need whether it's inshore, offshore, or shark fishing.

"Hard Bodyz" body and side cover
Infinite Anti-Reverse system
6BB+1
Manual Return Bail (4500 and Larger)
Machined aluminum screw in handle
Carbon ATD
Waterproof drag system
Digigear system
Braided line ready spool
Dynamic cut aluminum ABS spool
Air rotor

Daiwa Saltist MQ 2500D-H

$299.99

The Saltist you have come to know and love has been redesigned and upgraded. Still featuring a heavy duty aluminum frame for maximum durability, we have now added our Monocoque Body (MQ) for even more power and a more compact frame. An MQ frame design allows us to fit a larger gear inside of the reel, adding power and longevity to your gear set. A 360 degree screw-in sideplate removes to need for traditional sideplate screws, allowing for a more compact and more weather resistant housing.

Utilizing a Zaion AIR ROTOR, the rotation is effortless allowing you to cast and retrieve all day with ease.

Complete with a Magsealed main shaft to maximize protection from the elements, you will be ready to take on the even the toughest of battles.

Available in a wide range of sizes from a compact 2500 perfect for inshore fishing, up to a heavy duty 20000 to take on the toughest offshore predators. The Saltist MQ is truly a prime example of what a spinning reel should be capable of.

Daiwa Saltist MQ 5000D-H

$319.99

The Saltist you have come to know and love has been redesigned and upgraded. Still featuring a heavy duty aluminum frame for maximum durability, we have now added our Monocoque Body (MQ) for even more power and a more compact frame. An MQ frame design allows us to fit a larger gear inside of the reel, adding power and longevity to your gear set. A 360 degree screw-in sideplate removes to need for traditional sideplate screws, allowing for a more compact and more weather resistant housing.

Utilizing a Zaion AIR ROTOR, the rotation is effortless allowing you to cast and retrieve all day with ease.

Complete with a Magsealed main shaft to maximize protection from the elements, you will be ready to take on the even the toughest of battles.

Available in a wide range of sizes from a compact 2500 perfect for inshore fishing, up to a heavy duty 20000 to take on the toughest offshore predators. The Saltist MQ is truly a prime example of what a spinning reel should be capable of.

Daiwa Fuego 2500D-XH LT

$99.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa Fuego 2500 LT	8/240, 10/210, 12/160	6+1	6.2:1	10/250, 15/185	22

The Daiwa Fuego LT series of spinning reels define Daiwa’s commitment to the LT concept of lighter, tougher fishing reels for anglers worldwide. Encased in a carbon material body, the Fuego LT spinning reel boasts various state-of-the-art technologies and materials that make it a premier value at its price point. The innovative MagSealed main shaft delivers supreme smoothness and performance while providing exceptional protection from water, dirt, and grime intrusion.

Housed inside the light and tough body of the Fuego LT, you’ll find DigiGearing that provides more strength and smooth, durable operation. The unique Air Rotor and Air Bail, like all parts of the Fuego LT, combine to reduce weight and provide velvety rotation that is perfectly balanced. From top to bottom, inside out, the Daiwa Fuego LT Spinning Reel provides incredible value and performance anglers of all types will appreciate.

Daiwa Technology Found In Fuego LT Reels :

Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
LT Concept - The LT family of reels boast a smaller, lighter, more compact body which is paired with a larger DigiGear for the ultimate combination of Light and Tough.
MagSeal - MagSeal is the process of using MagOil, a special liquid developed through space engineering, to create a water and dust resistant barrier. Unlike rubber seals, MagOil will not effect the rotational performance of a reel. This creates a seal that allows the reel to maintain a light and smooth rotation for optimal performance.

Daiwa Certate LT3000-XH Spinning Reel

$449.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
CERTATELT2500-XH	6/160, 8/110	10 CRBB + 1	6.2 : 1	8/200, 10/170	22

Loaded with top-of-the-line features and technologies that were previously only found in Daiwa's flagship reels, the Daiwa Certate LT Spinning Reels redefine what you can expect from spinning reels in their class. Built around Daiwa's LT "Light and Tough" concept, the Certate LT utilizes a lightweight, compact body to house an oversized precision machined main gear for the perfect combination of power and precision. Daiwa has borrowed their revolutionary monocoque single-piece body design from their ultra high end models like the Exist LT to create an aluminum frame that not only provides extreme rigidity and strength, but eliminates the necessity for pins and screws to hold the body together, thus making the reel more resistant to water intrusion. This frame design in addition to Daiwa’s proprietary Magseal technology used to seal the main shaft and roller bearing, make the Certate LT a reel fit to withstand the elements in both freshwater and saltwater environments. Other standard issue Daiwa features such as a lightweight Zaion Air Rotor Design and corrosion resistant ball bearings make the Certate LT a proper weapon of choice for those looking to dominate the lakes and inshore waters with the latest cutting-edge performance.

Daiwa Technology Found In Certate LT Spinning Reels:

LT Concept - The LT family of reels boast a smaller, lighter, more compact body which is paired with a larger DigiGear for the ultimate combination of Light and Tough.
Monocoque Body - Monocoque Body refers to the use of a one-piece frame and reel body. A single piece body allows for exceptional strength and rigidity, better spatial efficiency for housing larger gears, improved water resistance with the absence of screws, and significant weight reduction.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
MagSeal - MagSeal is the process of using MagOil, a special liquid developed through space engineering, to create a water and dust resistant barrier. Unlike rubber seals, MagOil will not effect the rotational performance of a reel. This creates a seal that allows the reel to maintain a light and smooth rotation for optimal performance.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
Corrosion Resistant Ball Bearings - Corrosion Resistant Ball Bearings boast a lifespan up to 12 times longer than traditional stainless steel bearings.

Daiwa BG MQ 10000H

$249.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG MQ 10000H	20/330 25/280	6BB+1	5.7:1	50/330 65/280	33.1

By reimagining the way a spinning reel is designed, the Daiwa BG MQ Spinning Reels put unprecedented strength into the hands of saltwater anglers of all stripes. Built around a single-piece Monocoque aluminum body, the renowned BG series of reels is now stronger and lighter than ever before. With the Monocoque design, the reel body serves as a stiff, distortion-proof frame that keeps the reel's internal components in precise alignment even under the most extreme drag pressures. This allows for increased cranking power and torque while extending the life of both the reels gears and bearings. Not only does a single piece body provide extreme rigidity and strength, but it also eliminates the necessity for pins and screws to hold the body together, thus making the reel more resistant to water intrusion. The reel also features 9 internal rubber seals at key areas like the drag stack, spool shaft, handle, and side plate, making it well equipped for long seasons in the surf. Featuring Daiwa's precision cut DigiGears that are between 20% and 40% larger than those of the competition, the BG MQ is built for unrelenting power. With sizes ranging from backwater reels for flounder and speckled trout to large offshore reels made to battle giant bluefin tuna, the BG MQ has all your saltwater angling bases covered.

Daiwa Technology Found In BG MQ Spinning Reels:

Aluminum Body - Lightweight and incredibly strong, aluminium allows strength and weightlessness to be achieved without the cost and corrosion issues of other metals.
Monocoque Body - Monocoque Body refers to the use of a one-piece frame and reel body. A single piece body allows for exceptional strength and rigidity, better spatial efficiency for housing larger gears, improved water resistance with the absence of screws, and significant weight reduction.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
ATD Drag - The Advanced Tournament Drag system uses a new proprietary grease that enables the reel to apply smooth and consistent start up drag pressure from the first pull, eliminating the stop and go pulling of drag that can result in broken lines and lost fish.

Daiwa Exist 3000 LT

$799.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa Exist 3000 LT	10/280, 12/220	12+1	5.2:1	15/250, 20/220	22

Daiwa Exist LT Spinning Reels Features:

90mm Crank handle
Hi-Grip I shape knob
Light/Tough magnesium monocoque body
Light/Tough Zaion Air Rotor
Aluminum alloy muchine-cut durable digigear
Magsealed body and line roller
Long cast ABS spool
Air bail
Twist buster 2
High lever water resistance construction
Made in Japan

Daiwa Saltist MQ 10000D-H

$319.99

The Saltist you have come to know and love has been redesigned and upgraded. Still featuring a heavy duty aluminum frame for maximum durability, we have now added our Monocoque Body (MQ) for even more power and a more compact frame. An MQ frame design allows us to fit a larger gear inside of the reel, adding power and longevity to your gear set. A 360 degree screw-in sideplate removes to need for traditional sideplate screws, allowing for a more compact and more weather resistant housing.

Utilizing a Zaion AIR ROTOR, the rotation is effortless allowing you to cast and retrieve all day with ease.

Complete with a Magsealed main shaft to maximize protection from the elements, you will be ready to take on the even the toughest of battles.

Available in a wide range of sizes from a compact 2500 perfect for inshore fishing, up to a heavy duty 20000 to take on the toughest offshore predators. The Saltist MQ is truly a prime example of what a spinning reel should be capable of.

Daiwa Saltist MQ 8000D-H

$319.99

The Saltist you have come to know and love has been redesigned and upgraded. Still featuring a heavy duty aluminum frame for maximum durability, we have now added our Monocoque Body (MQ) for even more power and a more compact frame. An MQ frame design allows us to fit a larger gear inside of the reel, adding power and longevity to your gear set. A 360 degree screw-in sideplate removes to need for traditional sideplate screws, allowing for a more compact and more weather resistant housing.

Utilizing a Zaion AIR ROTOR, the rotation is effortless allowing you to cast and retrieve all day with ease.

Complete with a Magsealed main shaft to maximize protection from the elements, you will be ready to take on the even the toughest of battles.

Available in a wide range of sizes from a compact 2500 perfect for inshore fishing, up to a heavy duty 20000 to take on the toughest offshore predators. The Saltist MQ is truly a prime example of what a spinning reel should be capable of.

Daiwa Fuego 2500D LT

$99.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa Fuego 2500 LT	8/240, 10/210, 12/160	6+1	5.3:1	10/250, 15/185	22

The Daiwa Fuego LT series of spinning reels define Daiwa’s commitment to the LT concept of lighter, tougher fishing reels for anglers worldwide. Encased in a carbon material body, the Fuego LT spinning reel boasts various state-of-the-art technologies and materials that make it a premier value at its price point. The innovative MagSealed main shaft delivers supreme smoothness and performance while providing exceptional protection from water, dirt, and grime intrusion.

Housed inside the light and tough body of the Fuego LT, you’ll find DigiGearing that provides more strength and smooth, durable operation. The unique Air Rotor and Air Bail, like all parts of the Fuego LT, combine to reduce weight and provide velvety rotation that is perfectly balanced. From top to bottom, inside out, the Daiwa Fuego LT Spinning Reel provides incredible value and performance anglers of all types will appreciate.

Daiwa Technology Found In Fuego LT Reels :

Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
LT Concept - The LT family of reels boast a smaller, lighter, more compact body which is paired with a larger DigiGear for the ultimate combination of Light and Tough.
MagSeal - MagSeal is the process of using MagOil, a special liquid developed through space engineering, to create a water and dust resistant barrier. Unlike rubber seals, MagOil will not effect the rotational performance of a reel. This creates a seal that allows the reel to maintain a light and smooth rotation for optimal performance.

Daiwa Certate SWG 10000-H Spinning Reel

$649.99

Built to dominate in blue water environments around the globe, the Daiwa Certate SW Spinning Reels are among the top contenders in the class of offshore spinners. Sharing many features with the 2020 Saltiga, the Certate SW is available in a run of sizing that covers the overwhelming majority of offshore spinning techniques. Among the features borrowed from the 20 Saltiga is Daiwa's signature Monocoque (MQ) Body and G1 Duralumin drive gear. This single piece body removes the requirement of a traditional side plate and screw system, replacing that with an engine plate that houses the incredibly large G1 Duralumin drive gear. This oversized drive gear provides incredible transmission of power for unmatched winding performance, while the MQ body offers never-before-seen strength and rigidity for a reel that can truly tackle anything. Despite its impressive strength and power, the Certate SW also boasts an incredibly lightweight and responsive construction thanks to Daiwa's Zaion Rotor design. Anglers can expect the smooth and effortless rotation that they have come to know from Daiwa spinning reels. Protecting this smooth and fluid operability is a Magsealed body and line roller. Combining Daiwa's famous Magseal technology with the MQ body means the Certate SW is supremely well sealed to the elements, allowing anglers to have tremendous confidence in their reels performance and longevity. Speaking of longevity, a multi-layer carbon drag delivers ten times increased drag durability. The new washer design combined with the aluminum radiation drag knob increases heat dissipation to improve drag performance under heavy load.

Daiwa Certate SWG 8000-H Spinning Reel

$649.99

Built to dominate in blue water environments around the globe, the Daiwa Certate SW Spinning Reels are among the top contenders in the class of offshore spinners. Sharing many features with the 2020 Saltiga, the Certate SW is available in a run of sizing that covers the overwhelming majority of offshore spinning techniques. Among the features borrowed from the 20 Saltiga is Daiwa's signature Monocoque (MQ) Body and G1 Duralumin drive gear. This single piece body removes the requirement of a traditional side plate and screw system, replacing that with an engine plate that houses the incredibly large G1 Duralumin drive gear. This oversized drive gear provides incredible transmission of power for unmatched winding performance, while the MQ body offers never-before-seen strength and rigidity for a reel that can truly tackle anything. Despite its impressive strength and power, the Certate SW also boasts an incredibly lightweight and responsive construction thanks to Daiwa's Zaion Rotor design. Anglers can expect the smooth and effortless rotation that they have come to know from Daiwa spinning reels. Protecting this smooth and fluid operability is a Magsealed body and line roller. Combining Daiwa's famous Magseal technology with the MQ body means the Certate SW is supremely well sealed to the elements, allowing anglers to have tremendous confidence in their reels performance and longevity. Speaking of longevity, a multi-layer carbon drag delivers ten times increased drag durability. The new washer design combined with the aluminum radiation drag knob increases heat dissipation to improve drag performance under heavy load.

Daiwa Procyon AL LT 4000D

$179.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa Procyon AL LT 4000D	250/14	6BB + 1RB	5.2:1	200/30	26.4

Ideally suited for both freshwater and inshore pursuits, the Daiwa Procyon AL LT Spinning Reels provide a rich feature set for anglers who demand high performance. Built around a rigid all aluminum body, the Procyon AL LT is highly resistant to body and frame flex to keep its internal components in proper alignment. This allows for increased cranking power and torque while extending the life of both the reels gears and bearings. Featuring Daiwa's proprietary Air Rotor and Air Bail designs, the reel maintains its stringency even under heavy drag pressures for a design that is powerful yet incredibly lightweight. The Aluminum frame houses an oversized main gear that is precision cut with Daiwa's DigiGear technology that provides considerably better gear meshing to increase smoothness and reduce gear wear over time. Anglers can expect smooth and consistent drag pressure from the first pull thanks to the Advanced Tournament Drag system that eliminates the the stop-and-go pulling of drag that can result in broken lines and lost fish.

Daiwa Technology Found In Procyon AL LT Spinning Reels:

Aluminum Body - Lightweight and incredibly strong, aluminium allows strength and weightlessness to be achieved without the cost and corrosion issues of other metals.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
Air Bail - Daiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth protrusion-free design and construction line, easily slides unencumbered along the Air Bail towards the line roller for trouble free line control.
ATD Drag - The Advanced Tournament Drag system uses a new proprietary grease that enables the reel to apply smooth and consistent start up drag pressure from the first pull, eliminating the stop and go pulling of drag that can result in broken lines and lost fish.
ABS Long Cast Spool - Compared to conventional spools, the LC-ABS has been shown to increase the average flight distance by approx. 5% due to its reduced weight and modified shape.

Daiwa 8000 Saltiga Saltwater Spinning Reel

$999.99

Reel Name:

Mono Line Cap. (test/yd):

Bearings:

Gear Ratio:

J-Braid cap. (lb/yd):

Max Drag (lb):

Daiwa 8000 Saltiga

16/330, 20/280

2MBB,4CRBB,6BB, 1RB

5.8:1

40/330, 50/280

55

FEATURES:

Heavy-duty saltwater spinning reel
Magsealed to keep water, dust and grit out of internal components
ATD (Advanced Tournament Drag) for a smooth and fluid drag across all levels of pressure
Long Cast ABS Spool causes less friction for increased casting distance
Monocoque body with 1-piece frame and 1-piece threaded side plate for a light and sturdy design
High-strength gear drive
Heat-dissipating drag knob

Brand : Daiwa
Country of Origin : Imported
Style : SALTIGA

Daiwa 8000 Saltiga Saltwater Spinning Reel

Daiwa 10000 Saltiga Saltwater Spinning Reel

$999.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa 10000 Saltiga	20/330, 25/280	2MBB,4CRBB,6BB, 1RB	5.8:1	50/330. 65/280	55

FEATURES:

Heavy-duty saltwater spinning reel
Magsealed to keep water, dust and grit out of internal components
ATD (Advanced Tournament Drag) for a smooth and fluid drag across all levels of pressure
Long Cast ABS Spool causes less friction for increased casting distance
Monocoque body with 1-piece frame and 1-piece threaded side plate for a light and sturdy design
High-strength gear drive
Heat-dissipating drag knob

Brand : Daiwa
Country of Origin : Imported
Style : SALTIGA

Daiwa 10000 Saltiga Saltwater Spinning Reel

Daiwa Procyon AL 2500D

$179.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa Procyon AL 2500D	8/240	6+1	5.3:1	10/250	22

One week it's redfish, snook or speckled trout. The next week might be bass or walleye. Your passion for both freshwater and inshore fishing demands a reel that keeps pace. You're the perfect candidate for the Daiwa® Procyon AL Spinning Reel. The go-anywhere Procyon AL's aluminum body contributes to increased torque and power while also extending the gear life. Digitally cut for weight efficiency, DIGIGEAR™ technology promotes better gear meshing to increase smoothness and resist gear wear. Daiwa's innovative Advanced Tournament Drag (ATD) gives you a built-in advantage while fighting fish. As soon as you set the hook, the reel instantly engages drag resistance. As the fish starts pulling the line, the ATD drag curve automatically returns to your preset preference. The Long Cast ABS spool's lip design creates a tighter cone-shaped angle, entering the guide train with less resistance to help eliminate wind knots and maximize casting distance. The air rotor stays rigid with minimal flex at high drag pressures. Generous cut-outs in the rotor reduce overall weight. The tubular air bail's construction further reduces weight and offers more rigidity than standard wire. This equates to more strength. A thicker design makes it easier to flip on the fly.

Ideal for both freshwater and inshore fishing
DIGIGEAR technology promotes better gear meshing
Advanced Tournament Drag (ATD) gives you a built-in advantage while fighting fish
Long Cast ABS spool's lip design eliminates wind knots and maximizes casting distance
Generous cut-outs in the rotor reduce overall weight
Lightweight, strong tubular air bail

Daiwa Procyon AL LT 3000D

$179.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa Procyon AL LT 3000D	10/280 12/220	6+1	5.2:1	15/250 20/220	22

Ideally suited for both freshwater and inshore pursuits, the Daiwa Procyon AL LT Spinning Reels provide a rich feature set for anglers who demand high performance. Built around a rigid all aluminum body, the Procyon AL LT is highly resistant to body and frame flex to keep its internal components in proper alignment. This allows for increased cranking power and torque while extending the life of both the reels gears and bearings. Featuring Daiwa's proprietary Air Rotor and Air Bail designs, the reel maintains its stringency even under heavy drag pressures for a design that is powerful yet incredibly lightweight. The Aluminum frame houses an oversized main gear that is precision cut with Daiwa's DigiGear technology that provides considerably better gear meshing to increase smoothness and reduce gear wear over time. Anglers can expect smooth and consistent drag pressure from the first pull thanks to the Advanced Tournament Drag system that eliminates the the stop-and-go pulling of drag that can result in broken lines and lost fish.

Daiwa Technology Found In Procyon AL LT Spinning Reels:

Aluminum Body - Lightweight and incredibly strong, aluminium allows strength and weightlessness to be achieved without the cost and corrosion issues of other metals.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
Air Bail - Daiwa’s innovative bail design features a hollow tubular stainless steel bail that delivers maximum rigidity and strength with minimum weight. Featuring a smooth protrusion-free design and construction line, easily slides unencumbered along the Air Bail towards the line roller for trouble free line control.
ATD Drag - The Advanced Tournament Drag system uses a new proprietary grease that enables the reel to apply smooth and consistent start up drag pressure from the first pull, eliminating the stop and go pulling of drag that can result in broken lines and lost fish.
ABS Long Cast Spool - Compared to conventional spools, the LC-ABS has been shown to increase the average flight distance by approx. 5% due to its reduced weight and modified shape.

Daiwa BG MQ 8000D

$249.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG MQ 8000D	16/330 20/280	6+1	5.7:1	40/330 50/280	33.1

By reimagining the way a spinning reel is designed, the Daiwa BG MQ Spinning Reels put unprecedented strength into the hands of saltwater anglers of all stripes. Built around a single-piece Monocoque aluminum body, the renowned BG series of reels is now stronger and lighter than ever before. With the Monocoque design, the reel body serves as a stiff, distortion-proof frame that keeps the reel's internal components in precise alignment even under the most extreme drag pressures. This allows for increased cranking power and torque while extending the life of both the reels gears and bearings. Not only does a single piece body provide extreme rigidity and strength, but it also eliminates the necessity for pins and screws to hold the body together, thus making the reel more resistant to water intrusion. The reel also features 9 internal rubber seals at key areas like the drag stack, spool shaft, handle, and side plate, making it well equipped for long seasons in the surf. Featuring Daiwa's precision cut DigiGears that are between 20% and 40% larger than those of the competition, the BG MQ is built for unrelenting power. With sizes ranging from backwater reels for flounder and speckled trout to large offshore reels made to battle giant bluefin tuna, the BG MQ has all your saltwater angling bases covered.

Daiwa Technology Found In BG MQ Spinning Reels:

Aluminum Body - Lightweight and incredibly strong, aluminium allows strength and weightlessness to be achieved without the cost and corrosion issues of other metals.
Monocoque Body - Monocoque Body refers to the use of a one-piece frame and reel body. A single piece body allows for exceptional strength and rigidity, better spatial efficiency for housing larger gears, improved water resistance with the absence of screws, and significant weight reduction.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
ATD Drag - The Advanced Tournament Drag system uses a new proprietary grease that enables the reel to apply smooth and consistent start up drag pressure from the first pull, eliminating the stop and go pulling of drag that can result in broken lines and lost fish.

Daiwa BG MQ 6000D

$219.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG MQ 6000D	14/340 20/270	6BB+1	5.7:1	30/320 40/240	26.4

By reimagining the way a spinning reel is designed, the Daiwa BG MQ Spinning Reels put unprecedented strength into the hands of saltwater anglers of all stripes. Built around a single-piece Monocoque aluminum body, the renowned BG series of reels is now stronger and lighter than ever before. With the Monocoque design, the reel body serves as a stiff, distortion-proof frame that keeps the reel's internal components in precise alignment even under the most extreme drag pressures. This allows for increased cranking power and torque while extending the life of both the reels gears and bearings. Not only does a single piece body provide extreme rigidity and strength, but it also eliminates the necessity for pins and screws to hold the body together, thus making the reel more resistant to water intrusion. The reel also features 9 internal rubber seals at key areas like the drag stack, spool shaft, handle, and side plate, making it well equipped for long seasons in the surf. Featuring Daiwa's precision cut DigiGears that are between 20% and 40% larger than those of the competition, the BG MQ is built for unrelenting power. With sizes ranging from backwater reels for flounder and speckled trout to large offshore reels made to battle giant bluefin tuna, the BG MQ has all your saltwater angling bases covered.

Daiwa Technology Found In BG MQ Spinning Reels:

Aluminum Body - Lightweight and incredibly strong, aluminium allows strength and weightlessness to be achieved without the cost and corrosion issues of other metals.
Monocoque Body - Monocoque Body refers to the use of a one-piece frame and reel body. A single piece body allows for exceptional strength and rigidity, better spatial efficiency for housing larger gears, improved water resistance with the absence of screws, and significant weight reduction.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
ATD Drag - The Advanced Tournament Drag system uses a new proprietary grease that enables the reel to apply smooth and consistent start up drag pressure from the first pull, eliminating the stop and go pulling of drag that can result in broken lines and lost fish.

Daiwa BG MQ 5000D

$219.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG MQ 5000D	14/280 20/180	6BB+1	5.7:1	30/230 40/160	26.4

By reimagining the way a spinning reel is designed, the Daiwa BG MQ Spinning Reels put unprecedented strength into the hands of saltwater anglers of all stripes. Built around a single-piece Monocoque aluminum body, the renowned BG series of reels is now stronger and lighter than ever before. With the Monocoque design, the reel body serves as a stiff, distortion-proof frame that keeps the reel's internal components in precise alignment even under the most extreme drag pressures. This allows for increased cranking power and torque while extending the life of both the reels gears and bearings. Not only does a single piece body provide extreme rigidity and strength, but it also eliminates the necessity for pins and screws to hold the body together, thus making the reel more resistant to water intrusion. The reel also features 9 internal rubber seals at key areas like the drag stack, spool shaft, handle, and side plate, making it well equipped for long seasons in the surf. Featuring Daiwa's precision cut DigiGears that are between 20% and 40% larger than those of the competition, the BG MQ is built for unrelenting power. With sizes ranging from backwater reels for flounder and speckled trout to large offshore reels made to battle giant bluefin tuna, the BG MQ has all your saltwater angling bases covered.

Daiwa Technology Found In BG MQ Spinning Reels:

Aluminum Body - Lightweight and incredibly strong, aluminium allows strength and weightlessness to be achieved without the cost and corrosion issues of other metals.
Monocoque Body - Monocoque Body refers to the use of a one-piece frame and reel body. A single piece body allows for exceptional strength and rigidity, better spatial efficiency for housing larger gears, improved water resistance with the absence of screws, and significant weight reduction.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
Air Rotor - The Air Rotor weighs up to 15% less than ordinary rotor designs. Its unique shape reduces unnecessary weight while distributing stress more evenly throughout the rotor for maximum strength.
DigiGear - The all-new DigiGear is precision machine cut and polished. This results in unmatched efficiency, better transfer of energy, and maximum smoothness.
ATD Drag - The Advanced Tournament Drag system uses a new proprietary grease that enables the reel to apply smooth and consistent start up drag pressure from the first pull, eliminating the stop and go pulling of drag that can result in broken lines and lost fish.

Daiwa BG 6500

$139.99

Reel Name:	Mono Line Cap. (test/yd):	Bearings:	Gear Ratio:	J-Braid cap. (lb/yd):	Max Drag (lb):
Daiwa BG 6500	20/370, 25/310,30/260	6+1	5.3:1	50/550, 65/440, 80/330	33

Daiwa BG Saltwater Spinning Reels are so smooth with digitally cut gears and seven ball bearings. Daiwa has redesigned these reels for 2016. These reels are powerful, yet priced just right. There's a size for your every fishing need whether it's inshore, offshore, or shark fishing.

"Hard Bodyz" body and side cover
Infinite Anti-Reverse system
6BB+1
Manual Return Bail (4500 and Larger)
Machined aluminum screw in handle
Carbon ATD
Waterproof drag system
Digigear system
Braided line ready spool
Dynamic cut aluminum ABS spool
Air rotor

Daiwa Spinning Reels

About Us

Testimonials

Contact Us