Don’t let your cold-holding power go down the drain. YETI®’s screw-in gasketed Drain Plug lets your cooler drain while the plug is only partially open.
Note: Fits Roadie®, Tundra® coolers, and TANK® Ice Bucket
Quantity: 2 Replacement Drain Plugs
YETI T-REX ROADIE AND TUNDRA LID LATCHES
Recognize these latches from anywhere? If you own an ATV, you might. These latches are built to withstand the pounding an ATV dishes out, and they’ll also last for years on your YETI® cooler. Same goes for the latch keepers, which are molded directly into the cooler’s body.
Note: The following Tundra coolers have two (2) latches: Roadie, 35, 45, 50, 65, 75, 105, 110, 125, 160, 210, 250, 350, 420
Note: The following Tundra coolers have three (3) latches: 85, 120, 155
Quantity: 2 Replacement Latches
YETI CORNER CHOCK SET
Secure your YETI® with our heavy-duty rubber Corner Chocks. Rubber provides excellent, non-abrasive support and can withstand years of wear and sun exposure.
4 rubber Corner Chocks.
2 marine grade bungees.
Stainless steel mounting hardware.
Fits: All Tundra series coolers except Tundra 210 and Tundra 350.
YETI TUNDRA/TANK HANDLES 45
There’s no breaking the handles on a YETI®. They have a textured grip and are secured with marine-grade polyester rope. You won’t find any slippery plastic to hold on to while transferring to a boat or a truck. Attachment points are integrated into the cooler body and keep handles out of the way when not in use.
YETI LOADOUT 5-GALLON BUCKET
The unsung hero of hard work deserved a little attention. Our ultra-durable LoadOut™ bucket is designed for lugging, loading, hauling, and baling. Whether you’re at the ranch, on the boat or in the garage, our 5-gallon bucket is nearly indestructible and ready to work. But don't depend on it for keeping ice cold, it has other jobs to do.
YETI RAMBLER BOTTLE SLING LARGE
This Bottle Sling is the simple solution to transporting your H20 hands-free. That way you can eat snacks, skip rocks, or indulge your dog in a riveting round of fetch. Mount it to the HitchPoint™ Grid on any Hopper® Soft Cooler (or the Camino™ Carryall Bag). But if you’re lookin’ to hike light, clip on the removable carrying strap, sling it over your shoulder, and enjoy the journey up to that gotta-see-it viewpoint.
The Large Bottle Sling will fit the 26 and 36 oz Rambler® Bottles. Rambler Bottle sold separately.
YETI TUNDRA SLIDING FEET
Get your Tundra® moving with the YETI® Sliding Feet. They allow you to slide your cooler with ease on hard surfaces like boat decks or truck beds. And these feet are made of polyethylene, just like our coolers, so they’re built to last. Mounting hardware included. Compatible with all Tundra models with oval two-prong feet. Not compatible with the Roadie 20.
Quantity: 4 Sliding Feet
YETI BEAR PROOF LOCKS
The YETI Tundra® and Roadie® meet the Interagency Grizzly Bear Committee (IGBC) standards for bear-resistant containers when used with extra-long shank Master locks. Our hard coolers have been thoroughly tested in both controlled bear simulations and with wild grizzly bears. When padlocks are used properly, grizzlies get nothing but frustrated after coming across your cooler.
Quantity: 2 Locks
YETI TARPON BEVERAGE ENTRY TOOL
Hydration is the key to survival, which makes the Tarpon Beverage Entry Tool your ultimate survival tool. With a twist-off wrench, church key, and can tab opener, it may replace your favorite multitool. Made of forged stainless steel.
YETI BEVERAGE HOLDER
Keep your beverage within reach on the boat, at the campsite, or on the river. The YETI Beverage Holder mounts to the side of your YETI Tundra or Tank and serves as a secure and convenient caddy for your frosty beverage. This heavy-duty, powder coated stainless steel holder slides securely into the AnchorPoint Tie-Down slot of your YETI, but doesn't get in the way of opening your cooler to grab another frosty beverage. Compatible with the Rambler Colster, 20 oz. Rambler Tumbler, 30 oz. Rambler Tumbler, and 18 oz. Rambler Bottle.
YETI ROD HOLSTER
Gain easy rod access whether paddling or boating. Our Rod Holster is made from a single heavy-duty polypropylene tube, attached to a sturdy, stainless steel, powder-coated bracket. It slides securely into the AnchorPoint™ Tie-Down Slot of your YETI® cooler without getting in the way of the lid and makes a secure storage option for your casting and spinning rods.
Note: Fits both YETI Tundra® and TANK® series
YETI LOADOUT BUCKET UTILITY GEAR BELT
Tackle any task with the LoadOut Utility Gear Belt. The QuadPocket™ Design is specifically engineered for all your general stuff. Tools, tackle, tchotchkes, spent shells, pocket knives, dog treats, bottle caps. You get it. But we’re not leaving it all up to the imagination. Our HitchPoint™ Grid webbing fits the YETI MOLLE bottle opener and the YETI MOLLE Zinger, so you’re equipped for anything—like popping open a cold beer.
YETI LOADOUT BUCKET CADDY
With everything the bucket can do, it’s not known for its organizational capacity. This 3-compartment caddy is built YETI tough, so it’s resistant to cracks and breaks when you need to fling it aside or drop it on the deck. It fits tight and stays put at the top, just below the bucket’s top with a retractable grab-and-go handle, so it’s lid-compatible, too.
YETI LOADOUT BUCKET LID
The LoadOut Lid keeps contents safe from salt spray and contained when the water gets rough. Taking inspiration from the Rambler family of lids, it’s transparent, easy to remove and water-tight – but this time we brought in reinforcements. The HeftHex™ Construction makes for a more durable framework that resists cracking, even in extreme temps with up to 300lbs of pressure. If you didn’t think lid technology was a thing before, this might get your attention.
YETI ICE™ is filled to the brim with science, dialed in to the most effective temperature to maximize the ice retention of any cooler, with a durable design that is break-resistant. Its custom shape reduces freezing time and multiple size options mean that you can outfit everything from your Hopper® Flip to your Tundra® 350 with YETI ICE. It works as an ice supplement, a welcome addition to your ice stash to make sure your contents stay colder for longer.
YETI ICE 1 lb - 8" x 2 5/8" x 1 5/8"
YETI ICE 2 lb - 8" x 5 3/8" x 1 5/8"
YETI ICE 4 lb - 10 3/4" x 8" x 1 5/8"
YETI RAMBLER TUMBLER HANDLES
YETI® wants to give you a hand, or at least a Handle, when it comes to securely hauling your Rambler® Tumbler. The Rambler Tumbler Handles offer an alternative way to hold your 20 oz. and 30 oz. Tumblers to optimize portability. The Handle’s rubber grip provides an easy fit for your Rambler and its polypropylene construction means your Handle will handle bumps and thumps just fine. Because it’s not just a cup handle – it’s a YETI.
If you're interested in learning more about the sodium brand take a look at our about page!